Miner Burn-In Testing & Grading
Stage three: prove it. Hashrate, wall power, board temperatures and error rate are recorded over a sustained loaded run — then the unit is graded on those numbers. Part of our used miner services.
24 h
Full-load burn-in on repaired boards
5 metrics
Hashrate, power, temps, errors, stability
A / B / C
Grade tied to measured behaviour
Per serial
Test record goes with the machine
What the test actually records
| Metric | How it is checked | Why it matters |
|---|---|---|
| Hashrate | Per board, against the model specification, over the run | A board that reports chips but underperforms shows up here, not on a photo |
| Wall power | Measured draw under load, compared with spec | Flags efficiency loss and PSU problems before the machine ships |
| Temperatures | Chip and board sensors tracked through the run | Catches weak thermal work, failing fans and hot domains |
| Error rate | Hardware error counters watched for creep | A machine that "works" but errors is worth less than a clean one |
| Stability | Restarts, board drop-outs and fan faults during the run | The difference between a bench pass and a machine you can leave running |
From measurements to a grade
The grade is a short label on top of a long record. What a buyer or a consignor actually receives is the record — the label just makes it comparable across a batch.
Grade A
At or near rated hashrate, temperatures stable through the run, no error-rate creep, all boards healthy. Cleaned and thermal refreshed.
Grade B
Inside a documented margin of spec after repair, stable through the run, cosmetic marks present. The fault history is included with the unit.
Grade C
Known derating or one unstable board, disclosed and priced accordingly. Parts, benches and short-horizon mining — not long-warranty stock.
If a unit cannot reach a sellable grade it is repaired again or sold as parts. It is never relabelled to make a batch look better.
Why test before selling
A used miner bought on a photo is a guess about three things: whether the chips are all alive, whether the thermal path still works, and whether it will hold up after the trip. A burn-in run answers all three before money changes hands.
For buyers
You see the numbers before you commit, instead of after the machine is racked and hashrate never arrives.
For consignors
Your batch is graded honestly, which protects the price you get — and tells you what is worth repairing first.
For farms
Replacement units arrive ready to rack, with a record you can compare against the machines already running.
For the bench
Test results feed back into repair: a repeated temperature spike on one domain is a fault we can still fix.
Testing questions
- How long is the burn-in?
- About 24 hours of full-load running for repaired boards, and a sustained loaded run for whole machines. A boot-and-show-a-number check is not a burn-in and we do not call it one.
- What is measured?
- Hashrate per board against spec, wall power under load, chip and board temperatures over time, hardware error rate, and stability (restarts, board drop-outs, fan faults).
- Do I get the test data?
- Yes — tied to the serial number, together with the fault history if the unit was repaired. Consignors get the same record for their own machines.
- Can a batch be tested faster?
- Testing can be split into screening and full burn-in when a deadline matters, but the grade always states which level of test was passed.
Want the numbers, not the adjectives?
Tell us the model and how many units you need tested — you get a test plan and a per-unit record.